Security Glazing Tape 12mm x 4mm x 15M

Affixit

Material: Closed Cell High Performance PVC Security Glazing Tape Adhesive: Double Sided UV Resistant Acrylic Adhesive for Permanent Fixing Colours Available: Black Service Temperature: -40°C to 70°C (Application Temperature 10°C to 40°C) Security Glazing Tape - Professional Grade Tested to BS7412 clause 8 with window systems High Performance Tape This is a medium hard and resilient double‐sided, closed cell, PVC foam bonding tape. An acrylic pressure sensitive adhesive is coated on both sides, and the product has a white paper release liner. The material can be supplied with a film liner (BH) facilitating automatic application. Prevent the Unexpected Removal of Glass from Externally Glazed Units with Affixit Security Glazing Tape. Bonds to Timber, Glass & Plastics Provides Protection from Draughts Provides a Water Seal (when compressed by 30%) U.V. Resistant High Performance, Fully Approved Foam Tape. BS 7412 specifies requirements for the design, fabrication and performance of windows and glazed doorsets made from PVC-U extruded hollow profiles. It applies to windows and doorsets manufactured from PVC-U hollow profiles incorporating fusion welded corner joints. BS 7412 applies to windows and doors fabricated into frames in a factory, to be installed vertically (within 15°) into the external face of buildings, as single or multi-light units, in coupled assemblies when appropriate, of the following types: 1. Windows: a. Hinged: side-hung (open in or out), top-hung (open out), bottom-hung (open in), tilt and turn or turn before tilt; b. Projecting: side-hung (open in or open out) and top-hung (open out or reversible); c. Pivoted: horizontal and vertical (hung centrally or off-centre)including reversible; d. Sliding: horizontal and vertical; e. Side-hung: fully reversible; f. Fixed light; 2. Doors: a. Single leaf single-swing doors with or without side lights and top panels; b. Double leaf single-swing doors with or without side lights and top panels. It is applicable to assemblies in which any frame member is not longer than 3 m. It does not apply to curtain walls that span across horizontal structural members of floors but is applicable to windows within a curtain walling system.