8 Port Fast Ethernet Smart Harsh Poe Switch

Hikvision

Visualized topology management. Network health monitor. Layer 2 features: PoE watchdog, STP/RSTP, VLAN, SNMP, QoS, ERPS, etc. IP40 rating with intrusion and moisture protection. -30°C to 65°C wide temperature range in harsh environment. ShellMetal material, Net Weight0. 6 kg (1. 3 lb), Gross Weight1. 2 kg (2. 6 lb), Dimensions (W × H × D)197. 00 mm × 114. 20 mm × 42. 20 mm (7. 70'' × 4. 40'' × 1. 60''), Operating Temperature-30 °C to 65 °C (-22 °F to 149 °F), Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F), Operating Humidity5% to 95% (no condensation), Relative Humidity5% to 95% (no condensation), Power SupplyPower adapter: 48 VDC (working temperature: 0°C to 45°C); Grounding terminal: 48-57 VDC (working temperature: -30°C to 65°C), Installation ModeDesk-Mounted, Rail, Max. Power Consumption120 W, Power Consumption in Idle5 W, Surge Protection6 KV, Ports8 × 10/100 Mbps PoE port, 1 × Gigabit RJ45 port, 1 × Gigabit fiber optical port, MAC Address Table16 K, Switching Capacity9. 2 Gbps, Packet Forwarding Rate6. 84 Mpps, Internal Cache4 Mbits, PoE StandardIEEE 802. 3af, IEEE 802. 3at, PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-), PoE PortPoE: Ports 1 to 8, Max. Port Power30 W, PoE Power Budget110 W, Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition, Port IsolationPorts 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group, PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond, QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode, VLANVLAN is used for network scale planning and network health improvement. Support 802. 1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN, HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device, Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802. 1D STP/RSTP/ERPS, System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization, EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015), SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017), ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No. 19072006),